How Is Panic Bar Installation Done? – Complete Procedure

One of the most important things you can do to ensure that your business stays safe is Panic
Bar Installation. Panic bars are easy to use and only require one hand to operate. These
devices are a great way to reduce liability issues and ensure everyone in your building can get
out quickly in an emergency.


This article will discuss what a panic bar is, how they work, why they’re helpful in your home or
business location, and more!


What Is A Panic Bar?


A panic bar is a device installed on an exit door to allow people to escape in an emergency. It’s
also called a push plate, push bar, or panic hardware.
They can be found on doors leading out of public areas such as offices and conference rooms
so that when there’s a fire or other emergency. You need to get out fast; all you have to do is
open the door from the inside and push down on it with your hand or body weight (assuming
you’re not carrying anything). The spring-loaded mechanism unlocks automatically so that once
you’ve pushed down hard enough and released your grip on it—the door opens right up!


How Are Panic Bars Useful?


Panic bars are useful because they can help people escape a fire, crime, intruder, or dangerous
situation. The hardware is usually installed at the entrance to buildings so that people trapped
inside can use it to get out safely.


They’re also used in residential properties to provide emergency access for occupants and first
responders in case of fire or other emergencies. You may not think about panic hardware very
often unless you encounter one yourself—but then again, maybe you do! When was the last
time you locked yourself out of your home?


This could be due to forgetting where you put your keys or having them stolen; either way,
there’s no reason not to install panic hardware as it’s an easy solution that provides peace of
mind when it comes time for homeowners’ insurance claims.


What Are Different Types Of Panic Bars?


There are three different types of panic bars: concealed vertical rod, vertical rod, and panic bar
levers.


Concealed Vertical Rod Panic Bar


A concealed vertical rod panic bar is just what it sounds like: a horizontal lever in the doorframe
that controls a vertically-positioned sliding bolt. The lever must be pulled down before the door
can be opened from the inside or outside.


This type of lock consists of two parts—a bolt that moves up and down when you engage or
disengage it and an arm that holds this bolt in position. It’s commonly found on hotel room doors
as well as many other types of commercial properties; however, they require regular
maintenance because they tend to become worn over time due to repeated use.


Vertical Panic Bars


Vertical rod panic bars resemble horizontal panic bars in appearance. Still, instead of a
conventional horizontal lock, they contain locking and unlocking mechanisms that are activated
when the hardware is pressed at the bottom and top of the door.


Side Latch Panic Bar


It is similar to this crash bar. The locking mechanism, a heavy-duty side latch that latches into
the strike plate inside the door frame, is what makes the difference. There are no vertical locking
rods present.


Exit Only Panic Bars


Most standard Exit Only panic bars are installed to lock automatically with a key lock when the
door is closed and unlocked from the inside by using a simple push bar.


Panic bars are not always easy to use, especially for children and elderly people. The panic bar
can be too hard to push open, especially if the door is heavy or it has a lot of weight behind it.
This can cause frustration, resulting in injury from unnecessarily forceful pushing of the exit-only
device.


Which Places Need Panic Bar Installation?


Panic bars are used in many places, including:


● Schools
● Hospitals
● Offices
● Restaurants and bars (serving alcohol)
● Retail stores


Procedure For Installation


Top Latch Bolt


It’s common practice to install the top latch bolt first, then install the bottom latch bolt. This is
because most people can see the top latch at an exterior door. However, if you install your
hardware in reverse order, it will be less likely that someone will notice that there are two panic
bar latches instead of one.


Install The Bottom Latch Bolt


The latch bolt is a small piece of metal that fits into a small hole in the edge of your door. It
keeps the door from swinging open when it’s not supposed to. If you install this part incorrectly,
it won’t be able to latch properly and will just hang there uselessly. To make sure this doesn’t
happen:


● Install the bottom latch bolt first (so that when you close the door, its end will be at or
near its hole).
● Then install your top latch bolt on top of it so that both ends are going through their
respective holes at once.


Catering The Perfect Height


Install your panic bar at a height where people can reach it comfortably. Most people tend to
push the door open with their hip and shoulder; thus, most panic hardware is installed between
38″ – 48″ above the finished floor level.


Panic Bars are not meant for young children, so you should make sure that this bar is out of
reach for them, or if they do reach it, there is someone there who can help them open the door
without locking themselves in.


Consult The Manufacturer’s Instructions


To ensure that you install your Panic Hardware properly, we urge you to consult the
manufacturer’s instructions for each component.


If you need additional help with a specific type of installation or have questions or concerns
about anything, please call Lock And Popin Inc. We’re available 24/7 by phone and email, so
don’t hesitate to get in touch with us!


Why Need Professionals?


Panic bars are one of the most important safety features in your building. They should be
installed by a professional and by the manufacturer’s instructions to ensure they function
properly and serve their purpose. Panic bars should be installed at the correct height so that
they can be used by all occupants of your building, including those in wheelchairs or otherwise
unable to easily reach them.


They must also be installed on every exit door for them to provide maximum benefit during an
emergency. Finally, panic bar installations must be done correctly because if done incorrectly,
they can cause injury or even death!


What Can We Offer?


Call our company, Lock and Pop Inc, if you want to install a panic bar inside your building or
office. We can help you in installing the panic bar efficiently and quickly. A long list of satisfied
customers awaits you. Just contact us today to get your problems solved.
Moreover, we provide our services for multiple things, such as lock installation, rekey, and
creating duplicate keys so that you can go on with your work without any hurdles. With our
sincere and hard-working technicians, we provide the best quality and service in the market,
whether it is homeowners, associations, or companies— We provide the best material and
quality.


FAQs


How long does it take to install a panic bar?

The average panic bar installation takes about 30 minutes. However, the time for completion
can vary depending on the customer’s requirements.


What if I don’t want a new door? Can I still get a panic bar installed?


Yes! You can still get a panic bar installed even if you don’t want a new door; however, this will
require some extra work on our part. We will need to remove your old lock and drill holes into
your door’s frame, which means there will be visible holes after installation.


Are panic bars legal?


Yes! Panic bars are required by law in many states, including California, Oregon, Washington,
and New York.


Is it difficult to install panic bars?


Our installation technicians will ensure the project is completed quickly and efficiently. They’ll
also show you how to use your new panic bar system so that you can feel confident knowing
what to do in case of an emergency.


Conclusion


Every business is doing its best to provide customers with a safe environment, and panic bars
are an obvious choice. Panic bars are installed in numerous establishments, including banks,
retail stores, hospitals, and almost any business dealing with public access. With just a push of
a button, a door will spring open, and passersby will be able to get in out of dangers way.
Panic bar installation is fairly easy and something that most contractors can do, and that’s why
companies turn to them for guidance on where and when panic bars are needed. The
placement of panic bars depends on the building, but the most common places are at the back
or side exit doors, as these are areas where people can use an emergency exit.