Everything You Need To Know About Lock Key Extraction

If your key breaks off the lock, you might think it is a lost cause. But it’s not! You can get out of this situation with effort and know-how. The first step is to hire a locksmith who can perform lock
key extraction for you. They will remove broken keys from locks using different methods
depending on what kind of lock it is and how far the key is stuck.

What Is Lock Key Extraction?

Lock key extraction is the process of removing a key from a lock, usually with the use of
special tools. You cannot do it independently, so it’s best to leave it to an
experienced locksmith like Lock And Pop Inc.

The first step in lock key extraction is getting rid of any obstructions that might be preventing
the removal of your key. This may include dirt or rust on the surface where your
key is lodged. The next step will involve carefully cutting into your lock to get close
enough to pull out your stuck item safely and efficiently. Once this has been done, all you’ll need
to do is remove whatever remains inside and then put everything back together again!

How Keys Get Stuck Inside Locks?

When keys are left inside locks by accident, it’s often because the owner was too busy to
remember to take them out. But sometimes key breakage plays a part as well. If you’ve cut your
key too short and need a way of getting into your home or car, you’ll need a locksmith’s help.

If you’re wondering how to remove an old key from inside a doorknob or deadbolt lock once it’s
broken off in there, here are some things you should know:

What Are The Basics Of Lock Key Extraction?

When a key breaks inside a lock, it’s usually stuck pretty tight and difficult to remove. If
you’re trying to remove the broken part of your key by yourself (known as lock key extraction),
Some helpful tips make your job easier.

● First of all, try not to panic! It seems like things should work out at the end, and they
usually, do if you keep calm and use common sense while working on this project.

● If you have ever broken your key inside a lock, you know the frustration that comes with it. That’s because lock key extraction can be done anywhere and by anyone. Luckily, there is an easy way to solve this problem without having to call in
a locksmith.

● The process of extracting a broken key from the lock is both simple and painless—no
one will even know that your car was broken into! All it takes are some basic tools and
some patience. To see how easy it is, let’s dive into the step-by-step instructions

● The first thing that needs to happen before attempting any DIY project, such as
this one would be finding out what kind of lock is being used on your door so that way
when researching how exactly they work together, there won’t be any confusion
between styles/manufacturers, etc.

Broken Car Key Extraction

You might not know it, but your car key could break off in the lock at any time. It’s a common
problem that can be very frustrating if you need to learn how to deal with it. Luckily, we’ve included some helpful tips on performing a lock key extraction and the tools needed for each process step.

I want to let you know that broken car key extraction is a process that is used to remove the
broken key from the ignition cylinder or ignition switch. The process of broken car key extraction
is relatively easy, but it requires some experience and knowledge.



To perform this process, you will need the following:

● A flathead screwdriver or another tool with a similar shape and size as your car’s
ignition switch opening. You can use this tool to turn your lock cylinder counterclockwise
so that it retracts into its original position without damaging any part of the door panel
while doing so.

Once you’ve identified where your broken-off car key is stuck, take out all of your tools and start
by using a flathead screwdriver or knife blade to pry open the doorjamb around where the car is
parked. This will make contacting the vehicle easier and give you access to pull out any debris
that may have gotten lodged inside while trying to open up access points before removing
anything else from inside of them.

Different Methods To Get Key Removed From Lock

It’s important to know that not all keys can be removed from the lock by simply turning it. If
you’ve got a key jammed in a lock and no other way to remove it, you might wonder how to get
that key out.

Lock Key Extractor

The best method for removing a stuck key is using a lock key extractor tool. The tool uses brute
force to pull out the damaged part of the key so that the whole thing will come out of the lock.

Use A Drill

If your drill has enough power and torque, then using it on top of your stuck key may help break
them apart enough so they can be removed together as one unit. Be careful not to damage
anything nearby with flying debris!

Quarter Inch Sticking Out From Lock

Please take some time to think about how you will get the best results out of this situation. It’s easy to
fluster and make quick decisions that might not be in your best interest. If you’re lucky,
some tools may help you extract the key from its resting place in the lock mechanism—a
screwdriver or pliers could do the trick!

However, if all else fails, it’s best to try something only if necessary because any damage
done will cost extra money later (or worst-case scenario). So, could you call a professional for help?


Why Do We Need Lock Key Extraction?

A lock key extraction is a process that uses specialized tools to remove the key from the lock.
This procedure is necessary when someone loses their keys and needs to get into their home or
vehicle. The locksmith will use several methods of extracting the key, depending on how it is
stuck in the lock.

The most common method used for this type of service involves an electric drill and a small
metal rod called a “key puller” that fits inside your car door’s ignition switch shaft. If you have
lost your car or home keys, they can be removed by drilling out some small holes so they can
be pulled out with pliers or tweezers after being pushed back into place with another tool known
as an “extractor.”

Other methods include using special chemicals such as WD-40, which allows both sides of your
broken pieces together again, so once heated up, using the boiling water method will make
them come apart easily without damaging either one too much!

When To Hire A Professional For Lock Key Extraction?

When the key is broken off in the lock with a part sticking out at least a quarter inch, you can’t just
remove it from there and call it good; this is why you need professional help. If you try prying it
out with any tool or object, you’ll damage your door and keyhole.
You do not want these things to happen because once they do, no one will be able to open
those doors until someone can repair them again.

What Can We Offer?

Call our company, Lock and Pop Inc, if you have come across a stuck key in the lock. We can
help you with your key extraction as soon as possible. You can contact us today to get your problems solved. A long list of satisfied customers awaits

Moreover, we provide our services for multiple things, such as lock installation, rekey, and
creating duplicate keys so you can go on with your work without any hurdles. With our
sincere and hard-working technicians, we provide the best quality and service in the market,
whether it is homeowners, associations, or companies— We provide the best material and


The fact that you’re reading this article means that you’ve encountered a tricky lock situation.
Whether your car key broke off in the ignition and won’t come out, or a door lock malfunctioned
and won’t let anyone in or out of the house – it doesn’t matter how it happened. What matters is
that there’s an easy solution available.
There are many ways to remove keys without hiring professionals, although sometimes it is
necessary to seek professional help. We have discussed multiple ways of key extraction, and
you can try each one. Just try not to damage anything and call professionals when it is due.

Key Extraction