Technology is taking over the world and making our lives easy. Would not it be better if you let
technology take care of your house? Well, the solution is smart lock installation. Smart locks
are standard these days among new home setups based on evolving technology. Currently, new
homes use digital technology and are dependent on IoT. That means you can control any
device, door, or lock in your home with a simple tap on a smartphone.
Smart locks are relatively new and taking over traditional locks. They provide users with better
security and a sense of protection than conventional choices. These digital locks may have a
keypad, fingerprint, or retina scanner. Moreover, one can also control the locks at home with a
mobile application. You can even let your guests in and see who’s at the door.


Smart Lock Installation

The new generation of locks comes with new and better options. Suppose you went to work by
applying a simple lock, and when you arrived, there was not a single antique left in the house.
How would you feel that lower-cost security costs you more? Thus, smart lock installation is
necessary to provide users with better security and ease of mind.

However, the installation of smart locks is not that easy. The process involves better planning
and specific requirements to meet the criteria. One can get better security and different
customization options with smart locks and lead a better and less hectic life. We will provide a
complete guide on how smart lock installation works.


The Things To Know Beforehand

There should be enough research to best execute the task when starting anything. Therefore,
knowing locks and their different kinds is essential before setting up a smart lock. Differently
structured smart locks are available in the market, but most have at least three components in
common. An exterior piece may usually be the outside, an interior consisting of electronic
circuitry and deadbolts.

You should know what type of lock you are trying to install and the things needed to do the task.
For example, some smart locks require bolts, while some use nest guards for installation. If all of
that is covered, the tricky part is fixing the smart lock, and let’s get into it.


Installation Guide

Precaution

Before starting any physical procedure, check that the smart lock is working. Give it power, and
try locking and unlocking it again. Also, if it has a camera, check it through the app. It would be
best if you were sure that the lock is working before installing it into your door or any other place
that may cost a lot of time and money.


Removing Existing Lock

Well, now is the time to say goodbye to the old lock and throw away your keys. Removing the
last lock is the first task where the smart lock installation will happen. There should be a turn
piece of the last lock, and you must remove its mounting plate. After removing the lock, you can
see the lock cylinder and deadbolts inside the lock. Get the tools and remove the screws.
After that, unscrew the bolts of the side plate of the door. The deadbolt is the part that locks the
door by moving the machinery and attaching itself to the door end. After unscrewing it from the
door, you can remove the lock cylinder. Mounting bolts are the ones that keep the keyed
cylinder in place. With that gone, you can remove the deadbolt from the side and get free from
the old lock mechanism.


Match Size Of Smart Lock

Now you have a hole in your door waiting to be fixed with a new lock. But the first thing to
measure is the size of the smart lock and check if it matches the dimensions of the previous
lock. Make sure you extend the deadbolt before inserting it into the door. The mechanism may
have a D-shaped hole that needs to turn clockwise for the deadbolt to extend.

Now insert the new deadlock in the door hole and see if it correctly aligns at the center. Make
sure the face of the deadbolt is on the side of the door. If that’s the case, we are good to go;
otherwise, a different size or instrument would be needed.


Installing the Exterior of the Smart Lock


Smart locks come in different quality and types. The exterior can be different and may need
specific instruments for its installation. For example, the exterior for opening the smart lock can
be a keypad, fingerprint, or even a retina scan. All of that depends on the quality of the smart
lock, and they have different installation methods.
We will now consider installing a smart keypad lock as other locks are more related to this
method. The keypad may have a wire that needs to be slid into the door hole under the deadbolt
latch.


Mounting Plate

A mounting plate is necessary to install a smart lock as it attaches to the door ad provides the
area for support and attachment for the lock. The plate is attached using screw bolts, and the
outer part is suspended or fixed. Then, the screws are tightened on the plate, setting it on the
door hole and keeping the keypad lock in place. The pad is held on the other side for keypad
installation, and the mounting plate is installed.


Check Working Of Smart Lock

When things are in place, you need to check if there is any anomaly in fixing the lock. There can
be different hurdles or fitting issues that may prevent the lock from functioning smoothly. All you
need is to check the D-shaped hole inside the lock and turn it. If the deadbolt on the side of the
door works flawlessly without force, then the mechanism of the lock is working fine. Although
any restriction faced while turning the deadlock may cause problems in the future, try to see the
fitting again to get an insight.


Attaching Interior Part

This part is relatively easy than before, but there are still things to execute carefully. First, You
should connect the data cable of the smart lock to the interior part of the lock. This part is
essential as it will help keep the lock alive and be able to work with the application. Connect the
wire and then attach the spindle to the interior. The alignment should be perfect as it will lock
and unlock the door.

Now, when the lineup of the lock system is complete, it’s time to mount it up the plate. The
mounting plate we installed earlier is to provide support for the interior. Secure the smart lock
interior on the mounting plate and have one thing less to work on the list.


Interior Covering

First, install the new batteries for the lock and attach the given cover for the mechanism. After
establishing the internal mechanism, you must close it with the lid. Attach it to the surface and
screw the bolts on the door to fix it in place. The final look of the lock will be pleasing, and now
it’s ready to use.


Enjoy Better Security and Features

After fixing the lock inside the door, you must program it according to the usage. Install the
specific application for the smart lock and connect it through wifi. Try the lock if it’s working fine
and there is no anomaly.

Smart lock installation is complete after you complete all the steps. The lock provides better
security and different customization features once it is activated. You can also connect wifi or
Bluetooth functionality and remotely control the individual doors in the house. Smart locks also
give the user freedom of location and ease of mind.


FAQs

 

Will I need a drill for every smart lock?

No, that depends on the condition and where you are trying to apply it. For example, you may
not need a drill machine if there are already screw holes.


Do smart locks provide more options than conventional locks?

Yes, they come with wifi or Bluetooth support that helps to control them remotely from a different
place. Changing the security key is also easy.


Can you rekey the existing lock before smart lock installation?

Yes, you can rekey them as simply a usual door lock. But smart locks may require a functioning
key and some different tools.


Conclusion

Digital smart locks may have a touchpad, fingerprint reader, or retina scanner. Compared to the
conventional options, they provide users with more security and a sense of safety. Everyone
must follow particular conditions for smart lock installation; they are not that simple. The
installation procedure as a whole is a little challenging but doable. Anyone can change the
conventional lock by following the instructions. However, please verify that the lock is
operational and link the application to configure it after installation.

Leave a Reply

Your email address will not be published.